Volkswagen Scirocco Forum banner

Scirocco folding mirrors added

28K views 45 replies 15 participants last post by  Boydie 
#1 ·
As title, added the folding/heated/ambient lighted and reverse dip mirrors , fitting was quite easy but as i had to buy new they don't come with mirror glass or caps, so the old ones were removed and placed on the new mirrors.

Ok to start with it was a strip down of the door card, disconnect the mirrors then unbolt them from the car, put on old caps and glass then put the new mirrors on the car, then i tested it but the codes i was expecting to work didnt so i asked DAR from the forum what his codes where as he has the exact same set up as i just added plus the door warning lights so his codes should be spot on as long as i had the right software on my controllers and as i thought it was spot on and worked straight away, reverse dip works fine now and folding should be OK but i cant test as the switch is on back order from VW so should be with me this week.

All in i am quite pleased but was worried at the time when i couldnt get them to work as i expected as the coding was wrong but after getting the right ones from DAR and realising i had been using the wrong code for the door :mad: all was good.

Codes for the controllers (remember these are the codes with door warning lights/puddles fitted to the doors so have +64 added to the total.

Drivers
0021111

Passenger
0021366

Part numbers

1KA 959 565 A REH Mirror fold switch

1K8 857 508 Q 9B9 = Right (RHD) Mirror with Fold in and Entry Lights

1K8 857 507 R 9B9 = Left (RHD) Mirror with Fold in, Entry Lights and Memory Function



Note the extra wiring on the right of the mirror for the motors for the folding







And on the car

 
See less See more
5
#3 ·
northernscirocco said:
Nice one. :clap: - one thing I wish I'd specced when ordering.

Wouldn't dare try it myself! - what's your going rate??? ;)
Its not a cheap option to add afterwards :crazy: , fitting would be fairly easy and i could do it in about an hour or so but the issue is controllers, if you have the wrong ones then you need to buy new ones and a single one is probably more than the two mirrors put together :shock:
 
#5 ·
In case anyone is considering it here are the details of my door controllers

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2124
Coding: 0021111
Shop #: WSC 00020 790 00000
VCID: 397D40A309DF

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2124
Coding: 0021366
Shop #: WSC 00020 790 00000
VCID: 3A7F5FAF0CD9

No fault code found.
 
#6 ·
182_blue said:
northernscirocco said:
Nice one. :clap: - one thing I wish I'd specced when ordering.

Wouldn't dare try it myself! - what's your going rate??? ;)
Its not a cheap option to add afterwards :crazy: , fitting would be fairly easy and i could do it in about an hour or so but the issue is controllers, if you have the wrong ones then you need to buy new ones and a single one is probably more than the two mirrors put together :shock:
Is there a way of knowing if you have the right controllers? Vagcom?
 
#7 ·
BadBoy said:
182_blue said:
northernscirocco said:
Nice one. :clap: - one thing I wish I'd specced when ordering.

Wouldn't dare try it myself! - what's your going rate??? ;)
Its not a cheap option to add afterwards :crazy: , fitting would be fairly easy and i could do it in about an hour or so but the issue is controllers, if you have the wrong ones then you need to buy new ones and a single one is probably more than the two mirrors put together :shock:
Is there a way of knowing if you have the right controllers? Vagcom?
Above i have added my controller numbers for comparison, apparently the MAX part is the important part.
 
#11 ·
BadBoy said:
Excellent blue, remember everyone saying it would cost an arm and a leg and not worth it.

What's the cost fir the parts?
1KA 959 565 Aprox £25 (not sure yet as i dont have it yet, but ETKA suggests £25)

1K8 857 508 Q 9B9 £113.40

1K8 857 507 R 9B9 £125.21

Price before any discount and VAT from TPS
 
#15 ·
182_blue said:
In case anyone is considering it here are the details of my door controllers

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2124
Coding: 0021111
Shop #: WSC 00020 790 00000
VCID: 397D40A309DF

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2124
Coding: 0021366
Shop #: WSC 00020 790 00000
VCID: 3A7F5FAF0CD9

No fault code found.
Yep, mine are the same apart from last 4 digits for Component and VCID is different also.
 
#16 ·
This is another users who has the same as me except for door warning lights so coding is less 64

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2124
Coding: 0021047
Shop #: WSC 00020 790 00000
VCID: 397D484509DF

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2124
Coding: 0021302
Shop #: WSC 00020 790 00000
VCID: 3A7F57490CD9

No fault code found.
 
#18 ·
Here are mine

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2130
Coding: 0016949
Shop #: WSC 00020 790 00000
VCID: 39722FBA4F0384D4

No fault code found.

Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2130
Coding: 0016948
Shop #: WSC 00020 790 00000
VCID: 3A7030B64A058FCC

No fault code found.
 
#20 ·
BadBoy said:
Here are mine

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2130
Coding: 0016949
Shop #: WSC 00020 790 00000
VCID: 39722FBA4F0384D4

No fault code found.

Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2130
Coding: 0016948
Shop #: WSC 00020 790 00000
VCID: 3A7030B64A058FCC

No fault code found.
How old is your car ?

Posted from a mobile device via SciroccoNet Wireless
 
#22 ·
182_blue said:
BadBoy said:
Here are mine

Address 42: Door Elect, Driver Labels: 1K0-959-701-MAX3.lbl
Part No SW: 1Q0 959 701 H HW: 1Q0 959 701 H
Component: Tuer-SG 009 2130
Coding: 0016949
Shop #: WSC 00020 790 00000
VCID: 39722FBA4F0384D4

No fault code found.

Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX3.lbl
Part No SW: 1Q0 959 702 H HW: 1Q0 959 702 H
Component: Tuer-SG 009 2130
Coding: 0016948
Shop #: WSC 00020 790 00000
VCID: 3A7030B64A058FCC

No fault code found.
How old is your car ?

Posted from a mobile device via SciroccoNet Wireless
2010 with 2011 changes
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top